Description

Light-Weight Brick Production Line

Description The purpose of the system is to perform several activities in producing Light-weight Brick including mixing, foaming, molding and cutting.
The system consist of.

a. 1 unit Sieve Machine Tubular Rotary System, Tube diameter 60 cm.
Capacity 300 – 500 kg/hr
Frame is made from UNP steel section
Power is generated by 1.5 HP Engine
Transmission: Gear Box, V-belt dan pulley
Dimension : 300x180x150 cm
b. 1 Unit Foam Generator Capacity 1001/m
Air Compresor
Power Supply : 200 watt Dimension : 33 x 28 x 40 cm
c. 1 Mixing Machine
Main Frame is made from UNP 12 steel section, platform height 120 cm.
Mixer : Capacity 2 m2, tubular, 6 mm steel plate
Tubular thickness for front and rear side minimum 8 mm, butterfly valve 4 inch
Axis dia. 2 inch, double pipe, screw plate 8mm, 4 pith
Motor : 7,5 hp 3 phase, Gearbox type 135
Motor, compressor, gearbox and its accessories covers by steel plate.
Panel Box for control button, Hand rail and operator workin platform.
c. 1 Unit Bucket Single Hoice
This bucket serve as material feeder for the mixing machine (c)
Main Frame is made from UNP 10 steel section and pwered by 5.5 kW motor
Capacity 1000 kg bucket hoice
Overall dimension 1220 x1220x1300 mm, weight approximately 380 kg
d. 1 Unit Trolley Bucket Transfer
mixing material to the molding place. Bucket Capacity 0.75 – 0.8 m3, Flow pipe 4 inch. Transfer Molding Rail made from cnp 5 cm, overall length 180 m.
Sliding troll, Hollow 5×5 cm
e. 70 Pcs Molding Box
Dimension 120 cm x 60 x 20 cm, Mode from hollow 4cm x 4 cm x 2mm dan 3 mm thick steel plate.
f. 1 Unit Cutting Machine Main Frame is made from UNP 12 steel section.
Saw blade width 10 cm, thickness 1 mm
Cutting blade is powered by 2 HP 3 phase electromotor, gearbox type W80, Automatic

Untuk Informasi lengkap Katalog kami link berikut,